Choosing between exhibition stand builders in Lyon means looking beyond visual concepts. The contractor also has to understand production schedules, venue access, technical services, logistics, and the practical way visitors will use the booth during the show.
Lyon has one of France’s most important exhibition markets outside Paris. Eurexpo Lyon is located in Chassieu and provides around 120,000 m² of covered exhibition space across interconnected halls. Its exhibitor service manages technical requirements including electricity, internet, water, compressed air, and overhead rigging. Major current and upcoming events include Piscine Global Europe, Sirha Lyon, Global Industrie, Pollutec, and Solutrans.
The following companies were identified through fresh searches for Lyon exhibition stand services and verification of their Lyon-specific or directly relevant service information. This is an editorial selection, not an official ranking.
1. StandsZone- For Product-Led and Technical Exhibition Projects
StandsZone approaches Lyon projects around what actually needs to happen inside the booth. Its dedicated page for exhibition stand builders in Lyon covers concept development, 3D visualisation, technical preparation, fabrication, graphics, AV, transportation, installation and dismantling.
The Lyon material is particularly focused on exhibitions involving machinery, food-service equipment, technical displays and product demonstrations. That is relevant at Eurexpo, where events such as Sirha, Global Industrie and Pollutec can create very different space and utility requirements.
The company also separates contractor responsibilities from services that may need to be ordered through the organiser or venue. For international exhibitors comparing exhibition stand builders in Lyon, that distinction can help avoid assuming electricity, rigging, utilities, or venue services are automatically included within the construction quotation.
2. Standsbay- For Design-to-Dismantling Project Coordination
Standsbay maintains a dedicated service for exhibition stand builders in Lyon. Its published workflow covers idea development, 3D design, fabrication, transport, installation, on-site management, dismantling and storage.
That wider scope can be useful in Lyon because the booth itself is only one part of the operational plan. Eurexpo’s exhibitor department separately manages services such as power, internet, water, compressed air and suspended fittings, so contractors and exhibitors need to agree early on who is responsible for each requirement.
Standsbay also presents both stand design and physical construction within its Lyon service rather than offering design as an isolated deliverable. Companies considering a custom exhibition stand in Lyon can therefore compare its scope across design, production, logistics and show-floor execution before determining which venue items still need separate ordering.
3. ExproStands- For Venue-Aware Technical and Logistics Planning
ExproStands provides a dedicated service for exhibition stand contractors in Lyon covering booth design, fabrication, graphics, AV, freight coordination, installation, dismantling and post-show handling.
Its Lyon material pays particular attention to venue differences rather than treating every local project in the same way. Eurexpo Lyon, the Centre de Congrès and Halle Tony Garnier are discussed separately because access, freight routing, rigging and structural requirements can vary between locations.
The company also structures its process around the event, hall assignment, stand dimensions, products and operational requirements before fabrication begins. This makes ExproStands relevant when comparing exhibition stand contractors in Lyon for projects involving technical displays, machinery, hospitality areas or complex visitor flows.
For overseas exhibitors, its stated workflow also includes freight coordination and installation sequencing, areas that can become important when materials are arriving in France from another country.
4. LyonExpo- Local Support for Custom and Modular Stands
LyonExpo has one of the clearest local connections in this search. It describes itself as a local stand builder serving Lyon and the surrounding Rhône-Alpes market, including projects at Eurexpo Lyon and the Centre de Congrès.
Its services include bespoke exhibition stands, modular and rental solutions, 3D design, fabrication, transport, installation, furniture and AV integration. The company also states that it remains available during the event for practical assistance. Its focus on small and medium-sized stands may be particularly relevant for exhibitors that want a local supplier without moving immediately into a highly complex large-format build.
5. Alphaexpo- For Made-to-Measure Stand Production
Alphaexpo appears prominently in current Lyon stand-builder searches and has a dedicated Lyon service page. It specialises in custom exhibition stand design and identifies traditional, modular and hybrid formats among its options.
Its published information states that it operates integrated production workshops and manages projects through a dedicated project contact. The company also names Lyon events including Sirha, Eurobois, Piscine Global, Patrimonia, Paysalia and Global Industrie among the exhibitions it serves.
For businesses that place a high value on made-to-measure construction and direct production involvement, Alphaexpo is one of the more locally focused companies worth including in a Lyon supplier comparison.
6. PECH’UP- For Modular and Reusable Stand Concepts
PECH’UP is a Lyon stand designer focused on custom, modular and reusable exhibition environments.
Its service covers design, fabrication, exhibition installation, and storage, with stand formats ranging from compact spaces to larger projects. The company puts particular emphasis on eco-design and reusable construction rather than treating every exhibition as a completely new temporary build.
PECH’UP also references Sirha Lyon and other French professional exhibitions within its current event material. It may therefore be relevant for exhibitors whose programme includes several shows and who want the initial design to be capable of adaptation instead of being discarded after one event.
7. Contemporanea Eventi- For Integrated Design and Installation
Contemporanea Eventi has a dedicated service for exhibition stand construction in Lyon and specifically references installation at Eurexpo.
Its stated model brings design, manufacturing, transport and installation under one project route. The company also discusses practical design around demonstrations, storage and visitor movement rather than concentrating only on the appearance of the stand.
For Lyon, its service information references exhibitions including Sirha, Pollutec, Solutrans and Piscine Global Europe. That direct attention to the city’s exhibition calendar makes it a relevant option for companies comparing contractors with wider European production capabilities.
8. Decore Studio Events- For Turnkey Venue Coordination
Decore Studio Events has a Lyon-specific page focused on bespoke exhibition stand design and production.
Its published package covers brief interpretation, venue regulations, design, manufacturing, organiser documentation, delivery, assembly, dismantling, return transport and storage. It also describes support with access arrangements and loading areas during the installation process.
That venue-oriented project scope is useful because a contractor working at Eurexpo must coordinate booth production with fixed build schedules and technical documentation. Exhibitors comparing proposals should still establish which organiser fees and third-party venue services remain outside the contractor’s quotation.
9. Booth Vision- For Custom, Modular and Double-Decker Formats
Booth Vision currently has a dedicated Lyon page covering exhibition stand design, construction and on-site delivery.
Its service range includes bespoke stands, modular solutions and broader exhibition formats, with planning, booth design, construction, graphics, installation, dismantling, shipping, logistics and technical support listed as part of its wider offering.
This can make the company relevant for exhibitors looking for a single supplier to coordinate several parts of the project. As with other international providers, businesses should confirm exactly where production takes place, which Lyon venue services are included and who will supervise the final site installation.
10. ESBAU- For Custom and Modular Booth Construction
ESBAU appears in current searches for exhibition stand services in Lyon and maintains a dedicated Lyon page.
Its published offering includes custom exhibition stands, modular structures, graphics, installation and dismantling, project management, furniture storage and equipment rental. The company also asks exhibitors to provide details such as event dates, stand dimensions and existing designs before preparing the construction scope.
ESBAU may therefore be worth comparing for businesses that want a combination of booth production and supporting exhibition services rather than construction alone. As with any contractor, final evaluation should be based on the project-specific quotation, production plan and Lyon on-site responsibilities rather than broad marketing claims.
What to Check Before Choosing a Stand Builder in Lyon
The strongest way to compare exhibition stand builders in Lyon is to send each shortlisted company the same information: exhibition name, hall and stand number, official floor plan, stand dimensions, open sides, products, machinery, meeting requirements, graphics, AV needs and expected budget.
Eurexpo deserves particular attention during planning. Its official exhibitor service handles technical services including electricity, internet, water, compressed air and overhead fittings, while technical documentation is provided for issues such as floor anchoring, suspension, utilities and hall layouts.
That means a quotation labelled “turnkey” should still be checked line by line. Ask whether transport, installation, organiser files, rigging, electrical orders, graphics, furniture, AV, dismantling and storage are included or handled separately.
Lyon’s exhibition mix also makes one standard booth formula impractical. A food and hospitality stand at Sirha may require tasting, equipment and storage space. An industrial stand at Global Industrie may need machinery access and demonstrations. Pollutec exhibitors may rely more heavily on technical displays, process explanations and meeting areas.
The most useful contractor is therefore the one whose proposal matches the actual event, products and venue conditions rather than simply offering the most elaborate 3D rendering.
Editorial Disclosure: This article is an independently researched editorial comparison based on current publicly available search results and company information. It is not an official ranking, endorsement, or sponsored list.
